Güde GSS 500 Traduction Du Mode D'emploi D'origine page 23

Inspections and Maintenance
Unplug the unit before any maintenance/adjustment and cleaning. Unplug upon finishing the work as well Keep the machine
clean and free of any dust. Oil the slide well to prevent jerking.
Grinding Wheel Replacement
Fig. 13
Inspections and Maintenance Safety Instructions
Only a unit maintained and cared for on a regular basis may be a serviceable aid. Insufficient maintenance and care may result in
emergencies and unforeseen accidents.
Inspections and Maintenance Schedule
Time Interval Description
•
After every use
Spare Parts
Do you have any technical questions? Claim? Do you need spare parts or instructions for operation?
We are ready to help you quickly and without unnecessary bureaucracy at our site www.guede.com in the part Service. Please help us in
GB helping you. In order to identify your machine in case of a claim we need its serial number, product number and year of production. All the data
mentioned can be found at the type plate. Please write them down bellow to have them always handy:
Serial number:
Phone.: +49 (0) 79 04 / 700-360
Wipe the unit with clean dry cloth or blow off with low-pressure air .
Product number:
Fax:
To replace the wheel, lock it on the spindle at either side with a
forked wrench. The lock nut may be loosened or tightened in the
direction of the motor turning (clockwise thread)
+49 (0) 79 04 / 700-51999
Other Details if
Required
Year of production:
E-Mail: support@ts.guede.com