Publicité
Les langues disponibles
Les langues disponibles
Commands:
Use goggles
Use ear protectors
Environment Protection
Wastes to be
disposed of in a
packaging to be
professional manner
not to harm the
environment.
Packaging
Protect from
moisture
Technical Data:
Motor capacity
Assigned Use
The unit should be used exclusively to grind/sharpen and work hard metal saw discs.
The manufacturer shall not be made liable for damages if general rules and this manual regulations are not observed.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard
Catching, winding
Friction, abrasion
Electrical Residual Hazards
Hazard
Direct electrical contact
Indirect electrical contact
Use protective
gloves
Faulty and/or
disposed of
Cardboard
electrical/electronic
appliances to be
collected for
collected by
recycling.
authorised salvage
places.
Keep Up
Fragile
Connection
Speed
Description
Loose-fitting clothes, jewels or
long hair may be caught by
moving parts.
A contact with the rotating
grinding wheel may result in
serious injuries.
Description
Defective cable or plug may
cause an electrical shock
Wounds caused by conductive
parts on open electrical or
defective structural parts
Unplug before
Read operating
opening
manual before use
Weight
Protective action
Wear tight-fitting garments and
no jewels. Protect your hair with
a hairnet.
Always prevent any contact of
your hands with the wheel.
Wear protective gloves.
Protective action
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current switch
(RCD).
Always unplug before any
maintenance.
Operate only with RCD switch
installed.
Noise value
indication
Residual hazards
Residual hazards
Publicité
