Güde GSS 500 Traduction Du Mode D'emploi D'origine page 15

Warranty
Warranty claims in accordance to the warranty certificate attached.
General Safety Instructions
Prior to the initial use of the unit, the operating instructions should be read completely. If in doubt with regard to connection and
operation of the unit, consult the manufacturer (servicing department).
FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN ORDER TO SECURE A HIGH DEGREE OF SAFETY:
Caution!
•
The unit should be safely attached to the bench horizontally.
•
Your work place should be kept clean and sufficiently lit (500 lux).
•
Never use the unit close to flammable materials, gases and liquids.
•
Wear protection goggles, ear protectors and suitable protection clothing. Use a respirator if necessary.
•
Wear clothes fitted to the occasion. Do not wear loose clothing or jewels that could be caught by rotating parts. Non-skid shoes are
recommended. If your hair is long, wear a hairnet.
•
Mind a stable poise and good footing when working with the unit.
•
Other persons, children in particular, should be kept away from the work site.
•
Always leave the existing protection equipment in place and make sure that they work perfectly. The operation without the
protection equipment is not allowed.
•
Make regular checks to see that all the screwed joint are fitted firmly.
•
Make sure that the power supply cable is not taken within the reach of rotating parts.
•
Do not leave the unit unattended if it is running. Any time you leave the unit, switch it off. Do no leave any adjustment wrenches
stuck in the unit. Before switching on, make sure that all the wrenches and adjusting tools are removed.
•
Any longer products should be supported.
•
Avoid any contact with grinding aids and materials.
• Be careful to avoid any hit on the saw disc. No warranty may be granted against the diamond disc damage.
The unit is allowed for use in RCD mains (stray current protection)
Emergency Action
Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from
more accidents and calm him/her down.
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product Safety
Product compliance
with respective EU
standards
Bans:
General ban
In combination with
another pictogram)
Warning:
Warning/caution hazardous electrical
No touching No pulling the cable
Beware of
Keep at safe
distance
voltage
Do not touch Do not use the unit
rotating parts in rain