Safety Consciousness On The Job; Safety Instructions For The Operator; Safety Instructions For Installation And Maintenance Work; Unauthorised Modification And Manufacture Of Spare Parts - Wilo W-CTRL-CC Série Notice De Montage Et De Mise En Service

English

2.4 Safety consciousness on the job

The safety instructions included in these installa-
tion and operating instructions, the existing
national regulations for accident prevention
together with any internal working, operating and
safety regulations of the operator are to be com-
plied with.

2.5 Safety instructions for the operator

This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety or where
they receive instructions from such a person as to
how the device is to be operated.
Children should be supervised to ensure that they
do not play with the appliance.
If hot or cold components on the product/the unit
lead to hazards, local measures must be taken to
guard them against touching.
Guards protecting against touching moving com-
ponents (such as the coupling) must not be
removed whilst the product is in operation.
Leakages (e.g. from a shaft seal) of hazardous (e.g.
explosive, toxic or hot) fluids must be discharged
so that no danger to persons or to the environ-
ment arises. National statutory provisions are to
be complied with.
• Highly flammable materials are always to be kept
at a safe distance from the product.
Danger from electrical current must be eliminated.
Local directives or general directives [e.g. IEC, VDE
etc.] and local energy supply companies must be
adhered to.
2.6 Safety instructions for installation and
maintenance work
The operator must ensure that all installation and
maintenance work is carried out by authorised and
qualified personnel, who are sufficiently informed
from their own detailed study of the installation
and operating instructions.
Work on the product/unit should only be carried
out when it has been brought to a standstill. It is
mandatory that the procedure described in the
installation and operating instructions for shut-
ting down the product/unit are complied with.
Immediately on conclusion of the work, all safety
and protective devices must be put back in posi-
tion and/or recommissioned.
2.7 Unauthorised modification and manufacture of
spare parts
Unauthorised modification and manufacture of
spare parts will impair the safety of the product/
personnel and will make void the manufacturer's
declarations regarding safety.
Modifications to the product are only permissible
after consultation with the manufacturer. Original
spare parts and accessories authorised by the
manufacturer ensure safety. The use of other
38
parts will absolve us of liability for consequential
events.

2.8 Improper use

The operating safety of the supplied product is
only guaranteed for conventional use in accord-
ance with Section 4 of the operating instructions.
The limit values must on no account fall under or
exceed those specified in the catalogue/data
sheet.

3 Transport and interim storage

Immediately after receiving the product:
• Check product for transport damage.
• In the event of damage in transit, take the neces-
sary steps with the forwarding agent within the
respective time limits.
CAUTION! Risk of material damage!
Incorrect transport and interim storage can cause
property damage.
• The switchgear is to be protected against mois-
ture and mechanical damage.
• It must not be exposed to temperatures outside
the range of -10 °C to +50 °C.

4 Application (intended use)

The CC switchgear is used for automatic, conven-
ient control of pressure boosting systems (indi-
vidual and multi-pump systems).
The field of application is water supply in residen-
tial towers, hotels, hospitals, offices and industrial
buildings.
When used in conjunction with suitable signal
transmitters, the pumps offer low-noise and
energy-saving operation. The performance of the
pumps is adapted to the constantly changing
requirements in the heating / water-supply sys-
tem.
The intended use includes complying with these
instructions.
Any other use is considered to be outside the
intended use.
WILO SE 11/2018