Erreka VULCAN D Manuel De L'installateur page 42

INSTALLATION
Loosen the discharge screw
Mount the gland and introduce the cable
42
Installation Manual
CAUTION. VERY IMPORTANT:

Once the operator is mounted on the
supports, turn the discharge screw (1) once to
allow the correct operation of the hydraulic
system.
O
If you have to dismount the operator from its
supports, first tighten the discharge screw in
order to prevent the hydraulic fluid from
leaking.
P240H
1 Introduce the cable (3) through the gland PG11 (1).
2 Position the gland in the cover (4) and attach using
the PG11 nut (2).
P188F