Erreka VULCAN D Manuel De L'installateur page 41

Mount the operator on the front support
Mount the operator on the rear support
Mount the cover and the top
1 Mount the spindle (1) in the front support (2).
2 Lubricate the tip of the spindle (1) and the housing
orifices with grease.
3 Position the screw (3) with its corresponding nut (4).
P240C
1 Introduce the fork (1) in the support (2).
2 Position the vertical shaft (3) and secure with the nut
(4).
P240D
1 Mount the cover (1), ensuring it fits in the body of
the operator.
2 Secure the cover using the locking screws (2).
P240E
INSTALLATION
VULCAN D Hydraulic operator
41