General Notes; Copyright Protection; Disclaimer; Scope Of Application - HYDAC ELECTRONIC CANopen HLT 2550-L2 Notice D'utilisation

4

1 General notes

E

1.1 Copyright Protection

This Manual, including the illustrations contained therein, is subject to copyright protection.
Use of this manual by third parties in contravention of copyright regulations is forbidden.
Reproduction, translation as well as electronic and photographic archiving and modification
require the written permission of the manufacturer. Offenders will be liable for damages.

1.2 Disclaimer

This operating manual was made to the best of our knowledge Nevertheless and despite
the greatest care, it cannot be excluded that mistakes could have crept in. Therefore
please understand that in the absence of any provisions to the contrary hereinafter our
warranty and liability – for any legal reasons whatsoever – are excluded in respect of the
information in this operating manual. In particular, we shall not be liable for lost profit or
other financial loss. This exclusion of liability does not apply in cases of intent and gross
negligence. Moreover, it does not apply to defects which have been deceitfully concealed
or whose absence has been guaranteed, nor in cases of culpable harm to life, physical
injury and damage to health. If we negligently breach any material contractual obligation,
our liability shall be limited to foreseeable damage. Claims due to the Product Liability
shall remain unaffected.
In cases where the translation is used, the text of the original German Operating
Instructions shall prevail.

1.3 Scope of application

These instructions exclusively apply to the following measuring system types:
• HLT 2550-L2-xxx-F11-xxxx-000
The products are components of a system, labeled with affixed nameplates.
The following documentation therefore also applies:
• The system specific operating instructions,
• This manual
Edition: 2017-08-08
Before commissioning, check the instrument and any accessories
supplied. Before commissioning, please read the operating instructions.
Ensure that the unit is suitable for your application.Before
commissioning, please read the operating instructions. Ensure that the
unit is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions
and specifications are not adhered to, damage to property or personal
injury can result.
HYDAC ELECTRONIC GMBH
HLT 2550-L2 CANopen
Part No.: 669955