General Notes; Disclaimer; Warranty; Scope Of Application - HYDAC ELECTRONIC HLT 1100-R2 CAN Notice D'utilisation

4

1 General notes

E

1.1 Disclaimer

This operating manual was made to the best of our knowledge Nevertheless and despite
the greatest care, it cannot be excluded that mistakes could have crept in. Therefore
please understand that in the absence of any provisions to the contrary hereinafter our
warranty and liability – for any legal reasons whatsoever – are excluded in respect of the
information in this operating manual. In particular, we shall not be liable for lost profit or
other financial loss. This exclusion of liability does not apply in cases of intent and gross
negligence. Moreover, it does not apply to defects which have been deceitfully concealed
or whose absence has been guaranteed, nor in cases of culpable harm to life, physical
injury and damage to health. If we negligently breach any material contractual obligation,
our liability shall be limited to foreseeable damage. Claims due to the Product Liability
shall remain unaffected.
In cases where the translation is used, the text of the original German Operating
Instructions shall prevail.

1.2 Warranty

The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of HYDAC
ELECTRONIC GMBH always apply. These are available to the operator with the order
confirmation or when the contract is concluded at the latest.
You will also find these under www.hydac.com -> General Terms and Conditions.

1.3 Scope of application

These instructions exclusively apply to the following measuring system types:
 CANopen:
 SAE J1939:
The products are components of a system, labeled with affixed nameplates.
The following documentation therefore also applies:
 The system specific operating instructions,
 This operating manual as well as the relevant protocol description
Status: 2021/04/22
Before commissioning, check the instrument and any accessories
supplied. Before commissioning, please read the operating instructions.
Ensure that the unit is suitable for your application.Before
commissioning, please read the operating instructions. Ensure that the
unit is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions
and specifications are not adhered to, damage to property or personal
injury can result.
HLT 1100-R2-xxx-F11-xxxx-000
HLT 1100-R2-xxx-F12-xxxx-000
HYDAC ELECTRONIC GMBH
HLT 1100-R2 CAN Mod. 000
Part No.: 669937