Operation Method - Dolmar PB-7650.4 Instructions D'emploi

OPERATION METHOD
1. Adjusting Shoulder strap
Adjust the shoulder strap (1) to a length that is comfortable to work while
carrying the blower. To fasten (A) the strap, pull the end of the strap
downwards. To loosen (B) the strap, pull up the end of the fastener (2).
Pull the stabilizer strap (3) until there are no space left between your back
and the blower housing. To fasten (C) the strap, pull the end of the strap
downwards. To loosen (D) the strap, pull up the end of the fastener (4).
The hip belt (optional accessory) enables the operator to carry the tool
more stably.
2. Adjusting the control lever
For tube throttle model
Move the control handle along the swivel pipe to the most comfortable
position. Then tighten the control handle with the screw (1).
For hip throttle model
Move the handle assemble along the swivel to the most comfortable
position. Then tighten the handle with the screw (1).
Adjust the angle of the control arm for comfortable operation.
(A)
(1)
(C)
(3)
15
(B)
(2)
(D)
(4)
(1)
(1)