Search; Search By Time; Search By Calendar; Search By Event - gigamedia GGM DVR41TO Mode D'emploi

4.3. Search

EN

4.3.1. Search by time

4.3.2. Search by calendar

Note : The color of Date is gray if there is no any recording. But the color of date turns Black when the recording data of that date exists.
When you select the date which turned Black, the time bar will be shown including white, and red rectangular on Hour and Minutes.
White bar does not include recording data, and the data exist in red color.
If you select one red rectangular of Hour bar, its color changed to brown, and the color of minute bar will be changed to red if there is recording data in
those minutes.
And then, if you select one of these rectangular, the starting point is selected to play the recording data. The data will be played back when you click OK icon.

4.3.3. Search by event

72
This Menu is divided into 5 sub-menu :
BY TIME, BY CALENDAR, BY EVENT, GO TO FIRST and GO TO LAST.
Please Click or press SEARCH button, The Sub-menu of SEARCH will pop-up. And then if you select the
value in one of them, the playback bar Will be shown, and please see the page 13 to get how to control.
(1) Enter desired date and time to search for.
(2) Then, move the pointer to OK and press ENTER button.
It is the start point to play back the data.
(1) If you select SEARCH BY CALENDAR, the calendar will appear as the below.
(2) Select desired date by pressin
(3) Select desired Hour/Min by pressing
(4) Select OK and press ENTER button.
(1) If you select SEARCH BY EVENT, the following window will appear.
(2) Enter desired start time and end time to find EVENT.
(3) Select desired channel to search for.
(4) Select desired event type to search for.
(5) Select SEARCH button and press ENTER button.
3456
buttons and press ENTER button.
3456
buttons and press ENTER button.
www.gigamedia.net