Network - gigamedia GGM DVR41TO Mode D'emploi

4.2.5.2. HDD Smart
This window shows the temperature of HDD.
EN
If you select ON in SMART, you can change the value of the each items.
(1) The temperature threshold means that the temperature of HDD exceeds the desired value you input, the beep happen and the below MENU appears.
(2) Inspection Cycle is that how many often system check the Temperature of HDD.
(3) Daily time is that if you select the value of inspection cycle as daily, what time system check the temperature of HDD.

4.2.6. Network

4.2.6.1. Setup
• STATIC - Basically, you can choose one among STATIC, DHCP, and ADSL(PPPOE). If you choose DHCP mode, DVR system gets IP address automatically from IP router if
connected, and If you choose STATIC mode, input IP address which is connected to DVR.
• ADSL (PPPOE) - If you use ADSL model, select ADSL and enter PPPOE ID and PASSWORD. If you don't know ID and Password, please contact your ADSL service provider.
4.2.6.2. Stream
You can set up the recording rate and Network transfer rate separately.
If you select ON in dual streaming, the network transfer rate can be selected in accordance with desired value. If you select OFF in dual streaming, the network transfer
rate follows the recording rate.
3 kinds of parameter can be chosen , the maximum frame per second in 120 Frame in CIF.
67
www.gigamedia.net