gigamedia GGM DVR41TO Mode D'emploi page 51

3.3.1. Icons in Live Display Mode
In Live display mode, icons will be indicated on the screen to notify the system mode or status.
Below are the icon categories, which are indicated on the monitor.
ICON TO BE SHOWN
AT RIGHT-UPPER CORNER ON EACH CHANNEL
Selects specific 1ch with full screen
Screen-Division mode
HDD capacity usage status
When USB memory stick & HDD
When DVR is accessed via network
When ID of remote control is set
Channel sequence mode
3.3.2. Playback Buttons
If you select search mode, the status will be shown in the upper side of screen.
Now status This rectangular show the now status of playback
If you select4, the mark will be changed to 4, and the mark will show 8, when 8 is selected
Rewind Control rewind speed
Move frame by frame reversely in pause mode
Play / Pause Play or Pause the video
Fast Forward Control rewind speed.
Move frame by frame forwardly in pause mode
Stop Stop the playback and go to Live mode
Menu button also stop playing
Quick Search If you click this Icon, the Search sub-menu will pop up
• How to use playback bar
Play starts with PLAY button.
If you press PLAY button in LIVE mode, or select one thing in SEARCH SUB-MENU, DVR will prepare to play the recording data from the point you selected
• Playback mode changing
If you want to see a specific screen with full screen mode, press full-screen button or numeric button of remote controller.
To display QUAD mode screen, press QUAD button or click the Monitor Icon on screen.
You can control playback speed with
www.gigamedia.net
ICON TO BE SHOWN IN 1CH FULL SCREEN MODE
7 8
/ button. Whenever pressing the button, the speed of playback increases or decreases.
ICON TO BE SHOWN
AT LEFT-BOTTOM CORNER ON FULL SCREEN.
When Motion Detected
When Sensor Activated
PTZ
Recording
Digital x2 Zoom
EN
51