How To Display Menu Window; Setup Menu - gigamedia GGM DVR41TO Mode D'emploi

4.1. How to display menu window

Please press MENU button in Remote controller or Click right button of Mouse anywhere.
EN
The menu windows will be shown up the left side of the screen as the below
4.1.1. Setup
DISPLAY
OSD
LIVE-SEQ(FULL)
DEINTERLACE
VGA RESOLUTION

4.2. Setup menu

Going to setup menu, please select the <setup> icon
If you are not authorized properly, the right windows will appear.
And you can not access the SETUP Menu.
If the password Box will appear, please input "0000" in the box.
The password is set as "0000" in the factory. Please see the page 70
How to change password
To change password, If you have authorization to access SETUP menu, you can see the sub-menu as the right.
How to save or cancel setting you changed
• Save setting : The setting will be saved when you select OK Icon in each windows.
• Cancel setting : The setting will be canceled when you select Cancel Icon in each windows
58
SETUP FUNCTION
CAMERA RECORD
GENERAL PARAMETER
PRIVATE ZONE SCHEDULE
PTZ WATERMARK
PRESET MISC
SCAN POINT
COLOR
POSITION
SEARRCH
EVENT STORAGE
MOTION HDD FORMAT
SENSOR HDD SMART
VLOSS
E-MAIL
NETWORK
MAIL SCHEDULE
SET UP
ALARM SCHEDULE
STREAM
MISC
DDNS
CLIENT
ACCESS LIST
SYSTEM
CONFIG
TIME
INPUT DEVICE
USER
UPGRADE
TURN OFF DVR
www.gigamedia.net