2. Installing Product
EN
2.1. Installing HDD
• One HDD can be installed inside the product.
• If HDD was not installed in the product, please install HDD first as follows.
• Be careful not to be harmed by sharp edges of the product.
(1) Loosen screws on both sides and back to detach the product cover.
(3) To install HDD, you should upside down the set, and HDD can be installed
onto bottom with screw.
(5) Insert top cover to product as side picture and tighten screws again.
48
(2) Lift the end of top cover and pull out from product.
(4) Connect HDD Power and cable to HDD.
www.gigamedia.net