Display - gigamedia GGM DVR41TO Mode D'emploi

4.2.1. Display

4.2.1.1. OSD
You can select which is displayed in the screen with choosing each icon.
• CAMERA NAME - Show camera name on screen.
• CAMERA NUMBER – Show each number of cameras on the screen.
• CAMERA BOARDER – Show outline of channel.
• LANGUAGE – Select OSD language.
• OSD HIDE – Hide all OSD, time, or Icon bar
• AUTO HIDE – Hide status bar automatically during not using DVR.
• LEFT MARGIN – Move the OSD position of leftmost
(E.g. Camera number, Camera Name, Network, USB, etc)
• RIGHT MARGIN – Move the OSD position of rightmost
(E.g. Icons of HDD, POP, CH Status)
• TOP MARGIN – Move the OSD position to top (E.g. Icons of HDD, POP, CH status)
• BOTTOM MARGIN – Move the OSD position of bottom (E.g. Time-bar)
Margin value accept the numbers from 00 to 99.
• VGA/TV – Adjust OSD margin automatically according to CRT monitor or LCD monitor
After setting OSD, you should OSD OFF icon in MENU to hide OSD you selected.
4.2.1.2. Display-live-SEQ (full)
www.gigamedia.net
When you click Display Icon, display menu is divided into 4 sub-menus :
OSD, LIVE-SEQ, DEINTERLACE, and VGA RESOLUTION
Set switching time to display a full screen in sequence.
CH : Input desire channel no.
TIME : Input desired switching time
DEFAULT CH : Change to factory default value
ALL TIME : Same time is input to all channel.
Note : The time is second and maximum 99 second for switching time can be entered.
Top margin
Bottom margin
59
EN