User Login; Remote Device Management; Connect The Ipc By Poe Port; Add The Ipc By Lan Search - gigamedia GGM KITIPNVR Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

3. User login

Open the main menu:
Click « START » in the task bar, by default the taskbar is at the bottom of the screen, click and hold the taskbar, you
can then drag it to any position, if the taskbar is not displayed, right click the mouse button:

4. Remote device management

4.1. Connect the IPC by POE port

1) Device connection: Connect the IPC to the NVR RJ45 port by the RJ45 cable.
(Note: The IPC should support PoE)
2) IP distribution: NVR has the function to distibutor the IP address to the RJ45 port. The device connected by the RJ45 port
have the IP address automatically distributed by NVR. And the IP range can be freely chosen according to the situation.
3) Live view: Le NVR affichera automatiquement la vidéo pour les cameras connectées sur le port RJ45. Il n'est pas né-
cessaire de les ajouter manuellement dans le NVR.

4.2. Add the IPC by LAN search

22
Click « START » to enter the login in-
terface, insert the Device ID, the de-
fault Device ID is « 0 ». The initial user
name is: admin with no password, but
if you setup a password during the
setup wizard, you now need to input
your password here.
1) Device search: The NVR can search
of the IPC connected by the POE
port in the LAN by the search func-
tion of NVR remote device manage-
ment interface.
2) Add device: Search the device by the
channel wanted, tick the chosen
IPC, click add and save.
3) Live view: View the relevant chan-
nel after adding successfully of
the device.
www.gigamedia.net

Publicité

Chapitres

Table des Matières
loading

Table des Matières