Audio; Backup; Log View; Osd Off - gigamedia GGM DVR41TO Mode D'emploi

4.4.2. Audio

EN

4.4.3. Backup

Note : One channel only can be selected and can backup by USB memory
Backup viewer is automatically copied to the device together with backup data

4.4.4. Log view

4.5. OSD OFF

If you press click OSD in Remote controller, something displayed on screen will disappear or appear according to your selection on OSD MENU
If you click OSD OFF in MAIN MENU, something displayed on screen will disappear according to your selection on OSD MENU
Please see the page 51 to get more information.
[SETUP > DISPLAY > OSD > OSD WINDOWS > EACH PARAMETERS]
If you only click or move mouse, something will be displayed again.

4.6. REC

If you click REC in main Menu or press REC/Stop button in remote controller, recording will start or be stopped by toggle. The some steps should be advanced be-
fore record is selected.
Please Check whether the value of date and time is properly set.
• Check if HDD is formatted. If HDD is not formatted, please format HDD.
[If the HDD is not formatted yet, please see Page 66. [How to format HDD]
• Please come back to Record sub-menu of SETUP.
• Choose suitable values in parameter and schedule.
• The recording depends on your selection on schedule.
74
• Set audio output to make sounds at external speaker.
• Audio works only at full screen mode.
• You can control audio volume
• Before setting Audio volume, you can test it by using ON/OFF test Icon
You can back up the data you want to store or keep to USB Device.
For USB backup, connect USB device to USB port of DVR system.
Select Channel and time you want, and then move and Click the pointer to BACKUP Icon, or press
Backup button of remote controller.
• DEVICE – Select device to backup
• CHANNEL – Select desired channel
• TO AVI – Can make backup file as AVI file
• SMI – Time stamp to indicate time / data at AVI file.
Backup viewer is automatically copied to the device together with backup data
• FROM – Enter starting date time to backup
• TO – Enter ending date time to backup
You can see the system log status or save it into USB memory and see it in PC.
• EVENT TYPE – Select desired event type
• FROM – Enter starting date & time
• TO – Enter ending date & time
• BACKUP – Save log data into USB memory
• SEARCH – If you click SEARCH Icon, you can see log list in DVR..
www.gigamedia.net