Go To First; Go To Last; Function; Ptz - gigamedia GGM DVR41TO Mode D'emploi

4.3.4. Go to first

Play starts from oldest recorded data.

4.3.5. Go to last

Play starts from latest recorded data.

4.4. Function

4.4.1. PTZ

• If you press "P/T" button of remote controller, or select PTZ in Function Menu, screen will be changed to FULL screen mode and you can control PTZ camera.
• If you press advance Icon in PTZ window, PTZ- ADVANCE window will pop-up.
4.4.1.1. PTZ basique
3456
If you press
7
If you press
If you press numeric button of remote controller, target camera will be changed.
4.4.1.2. PTZ avancer
• FOCUS
• IRIS
• SPEED
• PRÉRÉGLAGE
Note : The PRESET-positions are set by PRESET menu [MENU > SETUP > CAMERA > PRESET]
The SCAN-lists are set by SCAN-POINT menu [MENU > SETUP > CAMERA > SCAN-POINT]
• OSD MENU If you click OSD MENU icon in case that Camera itself has OSD function, The OSD will be shown in accordance with Camera's OSD.
If OSD is not supported by Camera, OSD MENU does not work.
www.gigamedia.net
FUNCTION menu is divided into 4 sub-menu; PTZ, AUDIO, BACKUP, and LOG VIEW
button, camera will pan to left / right or tilt up / down.
8
/ button or search / log button of remote controller or Click (+), (-) Icon, the camera will zoom in or out.
+ : Focus-IN
- : Focus-OUT
AUTO : AUTO-FOCUS mode
+ : Open Iris
- : Close Iris
AUTO : AUTO-IRIS mode
+ : The control speed will increase
- : The control speed will decrease
If you want to go to a specific PRESET-position, select "GO" button.
If you want to scan PRESET-positions, select "SCAN" button
EN
73