Full Screen Mode - gigamedia GGM DVR41TO Mode D'emploi

3.3.3. Other Icons
3.3.3.1. HDD status
EN
It indicates capacity of HDD, the percentage show the usage of HDD.
3.3.3.2. Screen show status
You can select how screen will display.
• In Live MODE, there are 6 MODE; PIP, POP, Sequence, Quad, 9, 16.
But the 9, 16 can not operate in 4 channels.
• In play mode, there are 3 modes : Quad, 9, 16.
Also, only quad mode can be operated in 4 channels.
3.3.3.3. Channel icon
You can change channel displays on screen. There are 1~4 in 4channels, and 1~16 in 16channels.
3.3.3.4. USB icon
This Icon will be shown after you attach USB into DVR.
3.3.3.5. Network icon
This Icon will be shown while someone access DVR through Network with CMS, or Web-viewer.
3.3.3.6. Remote controller ID Icon
This Icon will be shown if you set up system ID in system sub-menu.
The color of number of Remote control Icon will be changed to "Yellow" in case that status is active, that is the number of remote controller matches the number
of system ID. Otherwise, the color will be changed to "RED".
If you click Remote control ID Icon, you can see the below;
- Status = Active [or De-active]
- SYSTEM-ID = 01, Request-ID = 01
Status means that the DVR can be operated or not with the remote controller.
SYSTEM-ID means the number of remote controller ID of DVR.
Request –ID means that the number of Remote controller you have got.
If you like to control the DVR with the remote controller, the value of SYSTEM -ID is the same to that of Request-ID.
Note : You should press two digits when you select System-ID. For example, press 0 + 5, when you select 05. Don't press only 5.
(Please refer to page 47 for setting remote control)
3.4. Other function of Remote control

3.4.1. Full screen mode

• Press button.
Whenever pressing button, screen will go to next screen.
• Press desired numeric button of remote controller.
52
www.gigamedia.net