Event - gigamedia GGM DVR41TO Mode D'emploi

4.2.3.3. Water-mark
EN
4.2.3.4. Misc

4.2.4. Event

4.2.4.1. Motion
• MOTION-AREA – Set the area to detect motion.
- ALL – Select the whole area.
- PART – Select a block.
Selection is done by toggle system through button of remote controller / front button or drag of mouse
- CLEAR ALL – Cancel the whole area.
• SENSITIVITY – Set the sensitivity of motion detection.
Sensitivity degree : 0 < 1 < 2 < ..... < 9
• ALARM-OUT – Set the alarm-out when motion is detected.
64
If you select ON in water-mark window, the recording data will include water-mark.
Data Verification can be checked in the backup-viewer whether falsified or not.
• OVERWRITE
If you select ON in overwrite, the oldest recorded files will be overwritten by newly recorded
data when HDD becomes full.
If you select OFF in overwrite, the DVR will not record anything more when HDD becomes full.
We recommend that you select ON.
• AUTO-DELETE
The data before assigned date will be deleted according to the date you input.
The value of 0(zero) disables AUTO-DELETE function.
• REC MODE
- Schedule – System records according to recording schedule
- Continue – System continue recording all day long.
- Event – Event recording will work regardless of schedule mode
Note : Event works when event in menu was selected at first, so you should set recording sche-
dule to record a event and then set Record mode to EVENT : SETUP > RECORD > MISC >
REC MODE > EVENT
.
www.gigamedia.net