EN
4.9 System setup
Set the system parameters such as General setup, GUI Display setup, Account setup, Upgrade, Restore config, Backup,
Device info and Auto maintain.
4.9.1 General setup
[System time] Set the system data and time.
[Data format] Choose the data format: YMD, MDY, DMY.
[List separator] Choose list separator of the data format.
[Time format] Choose time format: 24-hour or 12-hour.
[Language] English or Chinese.
[Hard disk full] Choose stop: Stop recording when the hard disk is full.
Choose cover: Cover the earliest recording files and continue recording when the
Picture 4.24 Regular setup
hard disk is full.
[Number] Only when the address button in the remote controller and the cor-
responding DVR number is matched, the remote operation is valid.
[Video format] PAL or NTSC.
[Latency time] Set the latency time in 0-60. 0 means no latency time.
[Car plate] Use for mobile DVR.
Picture 4.25 Summer time (week) setup
[Summer time] Choose the summer time option and pop the dialog box as followed.
Picture 4.26 Summer time (data) setup
4.9.2 GUI Display
Configure the video output parameters including the front output mode and code output mode.
Front output: In the local preview mode include: channel name, time title, channel title, recording status, alarm status,
code stream information, transparency and cover area.
Code output: In the network surveillance and video file mode include: channel name, time title, channel title, recording
status, alarm status, code stream information, transparency and cover area.
[Channel name] Click the channel name modify button and enter the channel
name menu. Modify the channel name. The 16 Chinese characters and 25 letters
are supportive.
[Time title] "■" means the selective state. Display the system data and time in the sur-
veillance window.
[Channel title] "■" means the selective state. Display the system channel num-
ber in the surveillance window.
[Recording status] "■" means the selective state. Display the system recording
status in the surveillance window.
[Alarm status] "■" means the selective state. Display the system alarm status
in the surveillance window.
Image 4.27 Affichage paramètres
[Code stream information] "■" means the selective state. The ninth window displays
the code stream information in the nine-window preview status.
[Transparency] Choose the background image transparency. The range is 128 ~ 255.
[Resolution] Set display resolution.
[Channel] Choose the set code output channel number.
www.gigamedia.net
50