Installing Product; Installing Hdd - gigamedia GGM DVR16RW Mode D'emploi

2. Installing product

EN

2.1 Installing HDD

• One HDD can be installed inside the product.
• If HDD was not installed in the product, please install HDD first as follows.
• Be careful not to be harmed by sharp edges of the product.
(1) Loosen screws on both sides and
back to detach the product cover.
(4) Restore HDD bracket to product and
connect HDD power cable and data
cable to HDD.
48
(2) Lift the end of top cover and pull out
from product.
(5) Insert top cover to product as side
picture and tighten screws again.
(3) Loosen screws of HDD bracket to
detach from product. Put HDD in HDD
bracket and tighten supplied 4 HDD
screws to bracket.
www.gigamedia.net