Vorwerk thermomix TM6 Mode D'emploi page 14

14
Health Risk
Damage Risk
Damage Risk
Damage Risk
Damage Risk
Corrosion inside the
appliance
For your safety
Because of the manufacturing process residues of oil or other
contaminants may be on the components of Thermomix® TM6. Those
contaminants are not suitable for consumption and pose a health
risk.
• Thoroughly wash all components and accessories, that could come into
contact with food, with warm water and dish soap before using the
Thermomix® TM6 for the first time.
• Make sure to thoroughly dry all washed components and accessories
before use.
Never place Thermomix® TM6 directly under furniture and fittings
(shelving units, wall units or similar), while in use. Doing so may
result in property damage.
• Ensure that there is sufficient clearance above and around the
Thermomix® TM6, taking into account the additional height when using
the Varoma®.
If the base unit is connected to an unsuitable power supply, it will
get damaged.
• Only operate the Thermomix® TM6 with the alternating current voltage of
110–127 V and main frequency of 50 to 60 Hz, as indicated on the plug
label.
The Thermomix® TM6 can sustain damage if there is not enough
water in the mixing bowl.
• Make sure that there is sufficient water in the mixing bowl. Approx. 8.5 oz
(250 ml) of water will evaporate in 15 minutes in the Thermomix® TM6.
• Add water as needed, especially if you have subsequently increased the
steaming time.
If the mixing bowl and mixing knife are in contact with water, other
liquids or food residues for a long time, they could get damaged.
• Clean and dry the components shortly after use.
• Because of variations in water quality, it is also possible for rust to form in
the mixing bowl when cooking food over a long period of time (slow
cooking, sous-vide or fermenting). Therefore please follow the instructions
on adding special ingredients (e.g. citric acid) to the cooking water.
Ensure that the mixing bowl and especially the contact pins
underneath are thoroughly dried after cleaning. If you use the mixing
bowl when it is still wet, rust could form inside the base unit.
• Allow the mixing bowl to dry completely before inserting it into the base
unit.
Thermomix®