ATTENTION
Water at high temperature.
High temperature.
ATTENTION
System under pressure
- Before dismantling the pump, empty the system or close the interception valves on both sides of the
pump. The pumped liquid may be at a very high temperature and high pressure.
8.4
Non-return valve
If the system is equipped with a non-return valve, ensure that the minimum pressure of the circulator is always higher than the valve
closing pressure.
8.5
Insulating the pump body (only for Evosta3)
It is possible to reduce the loss of heat from the EVOSTA3 pump by insulating the pump body with the insulating shells supplied with
the pump. See fig.9
Do not insulate the electronic box and do not cover the control panel
ENGLISH
Figure 7: Insulating the pump body
39