Before First Use - SOLIS BARISTA GRAN GUSTO 1014 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

B E F O RE F I RS T U S E
s
Carefully remove the appliance from the packaging and remove all stickers, labels
(except for the type plate) and packaging materials.
Remove all accessories from the packaging and from the appliance.
Remove the water tank. Clean the water tank, the lid, the plunger, the measuring
spoon and the filter inserts as well as the portafilter and the single outlet with
warm water and some mild dish washing liquid. Then rinse well and dry.
GB
Also, wipe the casing of the espresso machine and the drip tray with the drip grid
clean with a soft, damp cloth and dry everything.
CAUTION: The appliance chassis, the power cord and the power plug must
never be submerged in or come into contact with water or any other liquid!
NOTE: The parts of the espresso machine and the accessories are not dish-
washer safe.
Fill the water tank with cold tap water to the MAX marking. Close the lid again.
Reinsert the water tank by hanging both hooks of the water tank into the two
black suspension brackets on the appliance back side.
110
RIN SE T HE APPLIA NC E B EFOR E THE FIR ST A ND EVER Y USE
To rinse the inner parts of the appliance, you should let the water of the filled water
tank run through completely before using it for the first time.
Generally, we recommend rinsing the appliance before every use for approx.
20 seconds to warm up all the appliance parts and stabilize the brewing process
temperature – like that, the first cup of espresso will be a right and hot pleasure!
In both cases, proceed as follows:
Place a filter insert (without ground coffee) in the portafilter and press it into the
portafilter to make it lock in.
Insert the portafilter into the brewing group:
Hold the portafilter under the brewing head so that the handle is to the left.
GB
111

Publicité

Table des Matières
loading

Table des Matières