Problem
Possible cause
Not producing
Steam / hot water outlet
steam.
is clogged.
Water tank is empty.
Steam mode button was
not pressed / steam / hot
water control was not
GB
turned on.
The espresso machine is
faulty.
Hot water function
Water tank is empty.
is not working.
Preheating phase was
not completed.
Steam / hot water control
is not turned on.
The espresso machine is
faulty.
Coffee is dripping
Too much coffee in the
out of the rim of
filter insert.
the portafilter.
Coffee ground is sticking
to the sealing ring of the
brewing head.
The espresso machine is
faulty.
Should none of the above-stated reasons apply, please refer to Solis or an authorised
Solis service center.
128
Solution
Clean the steam / hot water outlet and
steaming nozzle.
Fill the water tank.
Press the steam mode button and
wait until it stops blinking. Turn the
steam / hot water control to the maxi
mum position.
Contact Solis service center.
Fill the water tank.
Wait untill all buttons are lighting up
constantly.
Turn the steam / hot water control to
the maximum position.
Contact Solis service center.
Make sure to use the correct amount
of coffee.
Turn off the machine, wait until it has
cooled down and then clean the filter
inserts, the portafilter and the brewing
head with its sealing ring.
Contact Solis service center.
EXP LAN ATI ON O F THE BUTTON LI GHTS
ON/OFF
Automatic
Manual
button
mode
mode
button
button
illuminated blinking
blinking
illuminated illuminated
illuminated illuminated Operating
illuminated illuminated
off
illuminated off
illuminated off
illuminated illuminated
illuminated off
illuminated off
off
illuminated off
off
illuminated blinking
blinking
rapidly
rapidly
Steam
mode
Reason
Solution
button
illuminated Preheating
phase
temperature
reached
off
Automatic
brewing mode
Manual brew-
ing mode
Hot water
mode
blinking
Preheating
phase of steam
mode
illuminated Steam mode
ready
illuminated Temperature
Wait until
the ma-
still to high for
brewing mode
chine has
after using
cooled
steam function
down.
GB
129