Before First Use - SOLIS PRIMAROMA Mode D'emploi

BEF ORE FIRS T U S E
s
– Carefully remove the appliance from the packaging and remove all stickers, labels
(except for the type plate) and packaging materials.
– Remove all accessories from the appliance.
– Remove the water tank. Clean the water tank, the lid and the filter inserts as well
as the portafilter with warm water and some mild dish washing liquid. Then, rinse
well and dry.
– Also, wipe the casing of the espresso machine and the drip tray with the drip grid
GB
clean with a soft, damp cloth and dry everything.
CAUTION: The appliance chassis, the power cord and the power plug must
never be submerged in or come into contact with water or any other liquid!
NOTE: The parts of the espresso machine and the accessories are not dish-
washer safe.
– Fill the water tank with cold tap water to the MAX marking. Put the lid back on.
– Reinsert the water tank by hanging both hooks of the water tank into the two
black suspension brackets on the appliance back side.
76
R IN S E T H E A P P LI AN C E B E FO R E THE FI R ST A N D EV E R Y U S E
To rinse the inner parts of the appliance, you should let the water of the filled water
tank run through completely before using it for the first time.
Generally, we recommend rinsing the appliance before every use for approx.
20 seconds to warm up all the appliance parts and stabilize the brewing process
temperature – like that, the first cup of espresso will be a right and hot pleasure!
In both cases, proceed as follows:
– Place a filter insert (without ground coffee) in the portafilter, the bulge on the
filter insert has to be placed exactly above the notch on the portafilter to make
the filter insert glide into the portafilter completely.
– Insert the portafilter into the brewing group:
Hold the portafilter under the brewing head so that the handle is beneath the
marking INSERT, to the left.
GB
'
77