Erreka MAGIC MA210 Manuel De L'installateur page 56

Masquer les pouces Voir aussi pour MAGIC MA210:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INSTALLATION
Make the orifices for the attachment of the metal fittings
Ø
Ø
52
Installation Manual
Ø
21mm
6,5mm
6,5mm
1 Position the template (1) supplied with the operator,
ensuring the lower edge of the template coincides
with the base of the frame (2) on the interior side of
the door.
2 Drill the orifices (3) where the profile base will be
attached.
Use 6.5 mm broach.
3 Make an orifice (4) of 21 mm in diameter in order to
make the cylinder key accessible (only in models
MA210F/MAS210F and MA250F/MAS250F).
4 Repeat points 1, 2 and 3 on the outside of the door.
P249C
5 Position the template (1) supplied with the operator,
ensuring the upper edge of the template coincides
with the top of the frame (2) on the interior side of
the door.
6 Drill the orifices (3) where the upper profile support
will be attached.
Use 6.5 mm broach.
7 Repeat points 5 and 6 on the outside of the door.
P249D

Publicité

Table des Matières
loading

Table des Matières