Erreka MAGIC MA210 Manuel De L'installateur page 57

Position the operator
1 Position the adaptation plate (1) (only in the case of
an iron door) in the operator (2).
2 Introduce the operator (2) in the gap in the frame
(3).
P249E
3 Attach the operator (1) to the frame (2) using the
screws (3).
4 Only models MA210F/MAS210F and MA250F/
MAS250F: position the two caps (4), one on each
side.

Take care to correctly position the two caps
T
(4) (one on each side), using the four
screws (T), to prevent the ingress of water.
P249F1
INSTALLATION
MAGIC built-in electromechanical operator
53