Ecological Oil Burners; Emulsified Fuel Oil Functioning - Riello PRESS 100 N/ECO Manuel D'entretien

4.8

ECOLOGICAL OIL BURNERS

WARNING
The transition from normal fuel oil to ecological fuel oil requires:
 The tank to be emptied of normal fuel oil.
 Cleaning of the tank and the pipes that carry the fuel oil to the burner.
 Application of a filter if there is not one already on the burner fuel line with a filtering grade of 0.3 mm maxi-
mum.
If this is not done, Riello S.p.A. declines all liability if the burner fails to work properly or wears out prematurely.
NOTES
These burners are the result of careful study that allows them to be used with ecological fuels as well; oils, that
in certain temperature and speed conditions, are particularly aggressive for the vital parts of the burner.
The objective has been achieved with the reduction of the transiting speed in some of the parts and an appropri-
ate choice of materials (in particular surface treatments) as well as a redefinition of the backlashes and coupling
tolerances.
The burners for ecological oils are very different from normal fuel oil burners because they have a separate
pump (worked by its own motor at 1400 rpm) and for the presence of double filtration between pump and noz-
zle.
4.9

EMULSIFIED FUEL OIL FUNCTIONING

4.10 BURNER START-UP PROGRAM DIAGNOSTICS
During start-up, indications are as per the following table:
Sequences
Preventilation
Ignition phase
Operation with flame ok
Operation with weak flame
Electrical supply lower than
Lock-out
Extraneous light
Key: Off
6195
COLOUR CODE TABLE
~
170V
Yellow
WARNING
In the case of functioning with emul-
sified fuel oil, it is necessary to
change the fitting on the burner (*)
with the one supplied with it.
D3435
Green Red
10 GB
Colour code