Lcd Unit Functions - Ducati SPORT 1000 Manuel D'utilisation

LCD unit functions

When turning the key from OFF to ON (Key-ON) the
instrument panel carries out a Check of the whole
instruments: indexes, displays and pilot lights (see fig. 5
and fig. 6).
LCD (1)
Turn the key to ON and press (A, fig. 6) to display trip
meter and odometer alternatively.
E
Resetting the trip meter
Keep (A, fig. 6) pressed for more than 2 seconds. When
the TRIP function is enabled (trip meter), display (LCD 1)
will reset.
LCD (2)
Turn the key to ON and press (B, fig. 6) to display clock and
oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds.
Press (A, fig. 6) to set AM/PM. Press (A, fig. 6) to set
hours. Use button (A) to change hour value. Press (B) to
set minutes.
Press (A) to increase the value. Keep the button pressed
for more than 5 seconds to proceed faster. Press (B) to
quit this function.
12
OFF
KM/H
CHECK
KM/H
C
TOT
F
A P
M M
TRIP
1
A
-1 1000
MIN x
fig. 5
-1 1000
MIN x
C
TOT
F
A P
M M
TRIP
2
B
fig. 6