Starting The Engine - Ducati SPORT 1000 Manuel D'utilisation

Starting the engine

Warning
Before starting the engine, become familiar with the
controls you will need to use when riding (page 10).
1) Move the ignition key to ON (fig. 27). Make sure both the
green light N and the red light
panel come on.
Important
The oil pressure light should go out a few seconds after
the engine has started (page 11).
Note
It is possible to start the engine with side stand down
and the gearbox in neutral. When starting the bike with a gear
engaged, pull the clutch lever (in this case the side stand
must be up).
on the instrument
ON
E
fig. 27
35