Ducati SPORT 1000 Manuel D'utilisation page 141

Performance data
Maximum speed in any gear should be reached only after
a correct running-in period with the motorcycle properly
serviced at the recommended intervals.
Brakes
Front
With double drilled disc.
E
Carrier material:
steel
Braking material:
stainless steel.
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
88 sq. cm.
Brake callipers with separate pistons.
Make:
BREMBO
Type:
30/32 pistons.
Friction material:
Toshiba TT 2172 HH.
Master cylinder type:
PSC 16.
66
Rear
With fixed drilled disc.
Braking material:
stainless steel.
Disc diameter:
245 mm
Hydraulically operated by a pedal on RH side.
Braking surface:
25 sq. cm.
Make:
BREMBO
Type:
P 32 C.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and can cause
severe eye and skin injury in the event of accidental
spilling. Wash the affected area with abundant running
water.