Mettler Toledo IND221 Mode D'emploi page 19

Numeric entry
1. Press for editing the displayed value.
F
The (last) digit will blink.
2. Increase the displayed digit using the
– or –
Decrease the displayed digit using the
3. When entering multi-digit numbers, use the
left.
4. Change the digit as described in step 2.
5. Repeat steps 3 and 4 if necessary.
6. When all digits are entered, use the
Note
With , you can clear the entry.
C
5.3 F2 – F key menu
Factory settings are printed with bold characters.
F2.1 – Function of the F key
Four different functions can be assigned to the F key:
When pressing the F key, the weight value is displayed in 10 times higher
MUL10
resolution
When pressing the F key, the weight unit switches between kg and lb
Unit
Plus/Minus weighing
OVEr
Additional settings, see F2.2
Counting
Count
Additional settings, see F2.3
F2.2 – Plus/Minus weighing
These parameters only appear if F2.1=OVEr is set.
F2.2.1 – Operating mode
Check weighing
CHECh
Classifiying
CLASS
T
key.
key.
key to move the cursor one place to the
F
key to confirm the entry.
19