Applications - Mettler Toledo IND221 Mode D'emploi

3.6 Cleaning
DANGER!
Electric shock hazard due to ingress of moisture!
▲ Before cleaning the weighing terminal, pull out the power plug to discon-
Further notes on cleaning
• Use a damp cloth.
• Do not use any acids, alkalis or strong solvents.
IND221
• Do not clean the weighing terminal using a high-pressure cleaning unit or under running
water.
• Follow all the relevant instructions regarding cleaning intervals and permissible cleaning
agents.
IND226
• Do not clean the weighing terminal using high-pressure or high-temperature water.

4 Applications

Depending on the setting of F2.1 parameter in the operator menu, different applications can
be activated using the
4.1 Displaying weight values with a higher resolution (x10)
For this purpose F2.1=MULt must be set in the operator menu (factory setting).
➜ Press
.
F
The weight value is displayed with a higher resolution (x10) for about 20 seconds.
Note
The weight value in higher resolution (x10) cannot be printed.
nect the unit from the power supply.
key.
F
F
13