Mettler Toledo IND221 Mode D'emploi page 17

4.5 Counting
For this purpose, F2.1=Count must be set in the operator menu.
When the weighing terminal is used predominantly for counting operations, METTLER TOLEDO
recommends applying the supplied label (Count, APW, PCS) over the left 3 indicators
(Under, OK, Over).
Determining piece weight and counting
1. Press to activate the counting function.
F
The Count and PCS indicators light.
2. Press and hold
3. Press repeatedly until the desired piece number (5, 10, 20, 50) for the
F
determination of the piece weight appears.
4. Put the displayed number of pieces on the weighing platform and confirm with
The number of pieces is displayed and the PCS indicator lights.
5. Put additional pieces or samples on the weighing platform.
The current piece number is displayed.
Switching between number of pieces and weight
Using the key, you can switch between the following values:
F
F
Count APW PCS
F
Count APW PCS
F
Count APW PCS
until PCS ... appears.
F
• Display of the number of pieces.
The Count and PCS indicators light.
• Display of the piece weight.
The Count and APW indicators light.
• Display of the gross weight.
The Count, APW and PCS indicators are
off.
17
.