Preparing The Holes On The Machine; Fitting The Unit On The Bracket; Unico Master Electrical Connection - Olimpia splendid UNICO TWIN Instructions Pour L'installation, Emploi Et Entretien

2
16).
WARNING: use exclusively the supplied grids, or grids with like characteristics.
2.1.8

Preparing the holes on the machine

hole having a diameter of 202 mm.
2.1.9

Fitting the unit on the bracket

2.1.10

UNICO MASTER electrical connection

in.
conditioner (minimum cross-section of the cable must be 1.5 mm
WARNING: Any replacement of the power cable must be carried out solely by Olimpia Splendid technical support or by
WARNING: On the power supply line of the appliance there must be an adequate omnipolar disconnection device that
complies with the national installation regulations. It is, however, necessary to check that the electrical power supply is
delayed fuse or other devices with equivalent functions are recommended).
to the current national regulations.
- remove the cable
2 ).
2
43
UNICO TWIN