Installation; Unico Master Installation Procedures; Choosing The Position Of The Unit; Warning - Olimpia splendid UNICO TWIN Instructions Pour L'installation, Emploi Et Entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2
2
2.1

UNICO MASTER INSTALLATION PROCEDURES

OLIMPIA SPLENDID
The electrical system must comply with the regulations and rating data in the technical sheet, with good grounding.
2.1.2

Choosing the position of the unit

The air conditioner must be installed on a wall that communicates with the outside.
CAUTION: after determining the best place for installation as described above, check for the absence of other structures
or systems (beams, piers, pipes, wires, etc.) at the points where the holes are to be drilled, which would prevent drilling
the holes required to install the unit.
Check again to make sure there are no obstacles to air circulation through the holes to be drilled due to plants and their
leaves, slats or panelling, blinds, gratings or grids too dense, etc.).
WARNINGS
-
it should not be placed under curtains;
2.1.3
Unit assembly
2.1.4

Warning

cannot be curved or bent.
2.1.5
Drilling the wall
torque and adjustable rotating speed depending on the diameter of the hole to be drilled. To prevent the creation of large amounts
:

INSTALLATION

2
41
UNICO TWIN

Publicité

Table des Matières
loading

Table des Matières