Wall Split Installation Procedures; Instructions For Installation - Olimpia splendid UNICO TWIN Instructions Pour L'installation, Emploi Et Entretien

2
DESCRIPTION
UNICO unit internal exchanger overtemperature (HTI)
UNICO unit external exchanger overtemperature (HTE)
UNICO unit outdoor temp. probe fault (short circuit) (TFS7)
UNICO unit outdoor temperature probe fault (open circuit) (TFS8)
UNICO unit internal fan malfunction (SV)
UNICO unit ambient temperature probe fault (short circuit) (TFS1)
UNICO unit ambient temperature probe fault (open circuit) (TFS2)
UNICO unit internal exchanger temperature probe fault
(short circuit) (TFS3)
UNICO unit internal exchanger temperature probe fault
(open circuit) (TFS4)
UNICO unit external exchanger temperature probe fault
(short circuit) (TFS5)
UNICO unit external exchanger temp. probe fault (open circuit)
(TFS6)
SPLIT unit malfunction
:
WARNINGS SIGNALLED DURING NORMAL OPERATION SHOULD NOT BE INTERPRETED AS ANOMALIES.
After this operation the LED must be switched off manually as indicated in section 2.4.1
2.1.13 Evacuating condensate water during an emergency
simple instructions:
2.2

WALL SPLIT INSTALLATION PROCEDURES

2.2.1

Instructions for installation

OLIMPIA SPLENDID
The electrical system must comply with the regulations and rating data in the technical sheet, with good grounding.
LED D LED C LED B
GREEN YELLOW GREEN
OFF OFF
ON
OFF OFF
ON
OFF
ON
OFF OFF
OFF
ON
OFF
ON ON
OFF
ON ON
OFF
ON
OFF
ON ON
OFF
ON ON
ON ON
ON ON
ON ON ON
ON ON ON
OFF
ON
LED A
RED
OFF
ON
OFF OFF
OFF
ON
OFF
ON
OFF
ON
OFF OFF
OFF
ON
OFF OFF
OFF
ON
OFF
ON
OFF
ON
45
UNICO TWIN
2