Unico Master Running Tests And Troubleshooting - Olimpia splendid UNICO TWIN Instructions Pour L'installation, Emploi Et Entretien

2
CAUTION: these operations should be performed with the machine already positioned on the bracket. Read the instructions
carefully before completely the electric connection.
2.1.11 T
effect).
OPERATION TO BE PERFORMED WHEN THE MACHINE IS SWITCHED OFF AND THE POWER SUPPLY IS DISCONNECTED.
CHANGING THE CONFIGURATION OF THE AIR OUTLET FLAP FROM BOTTOM TO TOP OF WALL
CHANGING THE CONFIGURATION OF THE AIR OUTLET FLAP FROM TOP TO BOTTOM OF WALL
IMPORTANT: FOR CORRECT OPERATING OF THE APPLIANCE, EVERY TIME THAT THE CONFIGURATION OF THE AIR
OUTLET FLAP IS MODIFIED, THERE MUST ALWAYS BE A CORRESPONDING RESPECTIVE ELECTRONIC CONTROL
SETTING.
2.1.12

UNICO MASTER running tests and troubleshooting

10 seconds. The acoustic signal emitted indicates that the self-diagnosis function has been activated.
LED A
LED B
LED C
LED D
NB
room temperature detected of 3°C.
minutes and then in cooling mode for another 2 minutes.
44
2