Meister TS800B Traduction Du Manuel D'utilisation Original page 81

you accidentally come into con-
tact with the saw blade.
j) Make sure that the saw blade
is mounted in the correct rota­
tion direction. Do not use grind­
ing wheels or wire brushes with
the circular bench saw. Incor-
rect mounting of the saw blade or
using non-recommended acces-
sories may lead to serious inju-
ries.
WARNING! When carrying out
setting and maintenance
work pull out the mains plug.
• Do not use the saw to cut up fire-
wood.
CARE! There is a risk of injury
to hands and fingers from the
moving saw blade.
• The saw is fitted with a safety
switch (11) to prevent it restarting
after a voltage drop.
• Use a cable drum only in the
unrolled condition!
• Ensure good lighting.
• Operators must be at least 18
years old. Trainees must be at
least
16 years old and under supervi-
sion.
• Keep the workplace free of wood
waste and other objects.
• Persons operating the saw bench
must not be distracted.
Note the direction of motor
and saw blade rotation.
MW-5461570-Bedien-2003.indd 81 MW-5461570-Bedien-2003.indd 81
• After switching off the saw do not
try to slow down the moving saw
blade by pressing it from the side.
• Fit well sharpened, crack-free and
undeformed saw blades only.
• Do not use circular saw blades
of high-alloy high-speed steel
(HHSS).
• Only use saw blades recommend-
ed by the manufacturer which, if
intended for cutting wood or simi-
lar materials, fulfil EN 847-1.
• Defective saw blades must be
replaced immediately.
• Do not use saw blades which do
not conform to the characteris-
tic data specified in these operating
instructions.
Do not expose to rain or mois-
ture.
• Ensure that all of the mechanisms
that cover the saw blade are fully
functional.
• The moveable safety hood (5)
must not jam fast when open.
• Safety fixtures on the saw bench
must not be removed or made
unusable.
• Damaged or defective safety fix-
tures must be replaced at once.
For every task carried out, the
protective hood (5) must be
lowered onto the work piece.
81
04.05.20 16:46 04.05.20 16:46