Grease Filters; Replacing The Led Lighting - Atag WV6092 Série Notice D'utilisation

MAINTENANCE

Grease filters

Replacing the LED lighting

• Carefully open the clip for the bulb with a screwdriver.
• Carefully remove the lamp from the hood.
• Turn the bulb a quarter of a turn clockwise and remove it from the socket.
• Place the new lamp in the reverse order of the described steps.
• Put the power cord back in the socket and check for correct operation.
Lamp Power (W)
5
Removing the grease filters
Switch the power supply off! Remove the plug from the socket or turn
the switch in the meter cupboard to '0'. Remove the filters one by one
by pulling on their release handles.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
Attention!
Disconnect the cooker hood from the power supply by pulling the plug
out of the socket or by switching off the power at the fuse box.
Socket Voltage
(V)
GU10 230
Dimensions ILCOS Code
(mm)
52 x 50 DRPAR-5/840-220/240-
GU10-35/36
DRPAR-5/830-220/240-
GU10-35/36
EN 7