Grease Filters; Carbon Filter - Atag WS90292FM Mode D'emploi

MAINTENANCE

Grease filters

Removing the grease filter
1. Switch off the cooker hood.
2. Pull the handle of the grease filter toward you and tilt it downward at the front.
Attention: clean the grease filters with soap every month.
▷
An aluminium filter will be dulled by the dishwasher cleaning agents; this is normal.

Carbon filter

Installing the carbon filter
Use a carbon filter if the cooker hood is not connected to a exhaust vent. This requires one-time
installation of a carbon filter frame, which comes separately. The carbon filter frame is part of the
recirculation set and must be ordered as a set.
1. Open the panel.
2. Remove the grease filter.
3. Attach the carbon filter to the frame.
4. Install the frame with filter in the cooker hood.
5. Put the grease filter back in place.
EN 9