Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
Odor filters
EN 8
All manuals and user guides at all-guides.com
Removing the grease filters
1. Pull the grease filter towards you and tilt it forwards and down.
Odor filters must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the odor filters to the motor.
3. Replace the grease filters.
Note:
The regenerable active odor filters can be washed by hand or in the
dishwasher at a maximum temperature of 65 °C. The washing cycle
must be done without other dishes and without dishwasher detergent.
Do not use any cleaning agents!
Remove excess water. Be careful to avoid damaging the filter. Place the
filters in the oven to dry for at least 1 hour at a maximum temperature
of 80 °C. After up to 3 years (or if the filtres are damaged), the filters
will need to be replaced. It is important that the grease filters and the
regenerable active odor filters are properly dried before installation.
The functioning:
• More noise is produced when odor filters are used than when the
cooker hood is used with an exhaust vent.
• Odor filters function optimally at a lower motor speed.
Publicité
Table des Matières
