Grease Filters; Carbon Filters - Atag WU50311BM Notice D'utilisation

MAINTENANCE

Grease filters

Carbon filters

Removing the grease filters
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Remove the filters one by one, after
having disconnected the relative fastening elements.
Cleaning or replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
Note:
• The regenerable activated carbon filter can be washed by hand or
in the dishwasher at a maximum temperature of 65 °C. The washing
cycle must be done without other dishes and without dishwasher
detergent. Do not use any cleaning agents!
• Remove excess water. Be careful to avoid damaging the filter.
Let the filter dry in the oven for at least 1 hour at a maximum
temperature of 80 °C. After a maximum of 3 years (or when the filter
is damaged or no longer works properly), the filter will need to be
replaced.
• It is important that the grease filters and the regenerable activated
carbon filter are properly dried before installation.
EN 9