Safety Instructions - Assa Abloy effeff 319 Notice D'installation Et De Montage

Safety instructions

!
Warning!
Diminished fire protection function may result in personal injury and property damage: Fire doors
prevent fire from spreading and are tested as a complete unit with accessories:
· regulations established by inspection authorities must be complied with,
· Check whether the door certification matches the lock.
· The door manufacturer must be consulted if the lock is to be replaced with a different model or if a lock
is to be retrofitted. Specifications of the door manufacturer must also be observed.
· the installed lock must be the appropriate size.
Danger resulting from damage: A damaged device is a safety risk and may not be put into operation.
Check the packaging and the device for damage.
A
At tention!
Property damage from work on the door leaf: The lock must be removed for any work on the door leaf,
such as drilling or cutting.
Impaired function due to incorrect rebate gap: The rebate gap must be appropriately adjusted
(„Technical data", Seite 52, Pic. 5).
Property damage due to unsuitable striking plate: The striking plate must be selected
(„Striking plates", Seite 53) and mounted in such a manner that it always acts as the stop face and slid-
ing surface for the latch.
Property damage due to improper handling during transport: The door leaf may not be lifted or carried
by the door handles.
Property damage from opening the lock: Open the lock will damage it and void the warranty
("Warranty", page 56).
Property damage from painting: Do not paint the lock or striking plate, or coat either with other sub-
stances.
Water and moisture will cause material damage: The lock must be protected to prevent water from get-
ting inside of it. Water may impair functioning and destroy the lock.
EN
36 Information