Tab. 1 :
Product variants
Product information
Product versions
The multi-point lock 319 is basically available in two variants: with B-function ("B-function (changeover
function)", page 33) or with E-function ("E-function (reversing function)", page 34). Depending on
the escape door function and locking cylinder, there are additional product variants (Tab. 1), as well as the
door handing for locks with E-function or B-function ("DIN right hand and DIN left hand", page 34).
Model
Function
E-function
B-function
319E-2
319E-3
319-B2
319-B3
319EB2
319EB3
319-B4
319-B5
B-function (changeover function)
In locks with B-function, the outer door handle is permanently engaged or disengaged with the locking
cylinder. With special variants without escape door function, this also pertains to the inner door handle.
With the multi-point lock 319 with escape door function, the inner door handle (DIN EN 179) or the panic
bar (DIN EN 1125) always remains engaged (remains active), so only the outer door handle is permanently
engaged or disengaged.
With the multi-point lock 319 without escaped door function (special variant), both door handles (inside
and outside) remain permanently engaged or disengaged at the same time.
When the doors are closed, the bolts automatically extend. The door is always locked again
("Self-locking", page 42).
Multi-point lock 319 with escape door function offers
· Approval for emergency exits according to DIN EN 179 or panic doors according to DIN EN 1125,
· split follower / split spindle
· mechanically engaged and disengaged outer door handles by means of locking cylinder activation.
Multi-point lock 319 without escape door function (special variant) offers
· continuous follower / continuous spindle.
· mechanically engaged and disengaged inner and outer door handles by means of locking cylinder
activation.
Inner and outer door handles are always engaged and disengaged simultaneously due to the continuous
spindle and the non-split follower
Emergency function
DIN EN 179
DIN EN 1125
.
Lock cylinders
Euro
Swiss
profile
profile
cylinders:
cylinders
EN
33