5.4 Installing the lifting wire rope in the unit
NOTE:
Insert
engagement hole marked by an arrow
NOTE:
one meter of wire rope between
this ring and the wire rope end
NOTE:
There should be a limit stop at around 1 meter
ahead of the free end of the lifting wire rope
and another limit stop on the wire rope
hook slide, both limit stops securely and
appropriately attached.This a mandatory safety
requirement.
5.5 Limit stops and pulleys
IMPORTANT Check that the anchor points and
pulleys are of appropriate strength with respect
to the forces which will be applied.
lifting wire rope
5.6 Check with load
6. OPERATING THE HOIST
NOTE:
7
GB