Available Memory For Exercise - Oregon Scientific SE833 Mode D'emploi

NOTE
Available lap memory refers to the lap
memory available to do exercise. See "AVAILABLE
MEMORY FOR EXERCISE" for more details.
2. Press SET to confirm selection.
3. Wait for the watch to search for device first before
pressing SET to start exercise. See "DEVICE SEARCH
BEFORE EXERCISE" for more details.
4. During exercise, you can view your exercise data
by manually pressing SET repeatedly or automatic
toggling. See "AUTO TOGGLE DATA VIEW DURING
EXERCISE" for more details. To know what exercise
data are shown, see "VIEW EXERCISE DATA DURING
EXERCISE" for more details.
5. If you need to take a break during exercise, press -/SP.
You can resume exercise by pressing ST/LAP/+. See
"PAUSE AND RESUME EXERCISE" for more details.
6. After you completed your exercise, you can save the
exercise data. See "SAVE EXERCISE DATA" for
more details.

AVAILABLE MEMORY FOR EXERCISE

The watch must have available memory to allow for exercise.
If you want to exercise but there is no available lap memory,
the watch will prompt you to overwrite first before you can
exercise.
When the available lap memory is used up, AUTO and
PROG screens will show
or
and the watch will display the screens below if you press
SET to exercise. You cannot start exercise unless you
overwrite old lap memories.
2SEC
Press SET to overwrite old lap memories. After overwriting,
the available lap memory will resume and the screens will
display
or
13