Precautions - Oregon Scientific SE833 Mode D'emploi

POWER
Watch
SZ909 chest belt
OPERATING ENVIRONMENT
Operating temperature
Storage temperature

PRECAUTIONS

To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using the
product:
Use a soft, slightly moistened cloth. Do not use
•
abrasive or corrosive cleaning agents, as these may
cause damage. Use lukewarm water and mild soap to
clean the watch thoroughly after each training session.
Never use the product in hot water or store it when
wet.
Damage to the product may occur if the keys are
•
pressed underwater.
Hot steam may cause damage to the product. Do not
•
wear it in steaming shower, spa or hot tub.
1 x CR2032 3V lithium battery
1 x CR2032 3V lithium battery
For watch
0°C to 40°C
(32°F to 104°F)
For SZ909 chest belt
5°C to 40°C
(41°F to 104°F)
For watch and SZ909 chest
belt
-20°C to 60°C
(-4°F to 140°F)
The product should be rinsed thoroughly with fresh
•
water after being in contact with salt water.
Do not subject the product to excessive force, shock,
•
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods.
Such treatment may result in malfunction.
Do not bend or stretch the transmitter part of the chest
•
belt.
Do not tamper with the internal components. Doing
•
so will terminate the product warranty and may cause
damage. The main unit contains no user-serviceable
parts.
Do not scratch hard objects against the LCD display as
•
this may cause damage.
Take precautions when handling all battery types.
•
Remove the batteries whenever you are planning to
•
store the product for a long period of time.
When replacing batteries, use new batteries as
•
specified in this user manual.
The product is a precision instrument. Never attempt
•
to take this device apart. Contact the retailer or our
customer service department if the product requires
servicing.
Do not touch the exposed electronic circuitry, as there
•
is a danger of electric shock.
Check all major functions if the device has not been
•
used for a long time. Maintain regular internal testing
and cleaning of your device. Have your watch serviced
by an approved service center annually.
When disposing of this product, ensure it is collected
•
27